Post by: Fierofool on April 07, 2011, 03:44:56 pm
Post by: TopNotch on May 17, 2011, 11:56:49 am
This is a list of sources for the 1227730 ECM.
Engine Control Module (ECM) 1227730
66 COMPATIBLE MODEL YEARS
Pontiac 6000 1987, 1988, 1989, 1990, 1991Chevrolet Beretta 1987, 1988, 1989, 1990, 1991, 1992, 1993
Chevrolet Camaro 1990, 1991, 1992
Chevrolet Camaro IROC-Z 1990
Chevrolet Camaro Z28 1991, 1992
Chevrolet Cavalier 1987, 1988, 1989, 1990, 1991, 1992, 1993
Chevrolet Celebrity 1987, 1988, 1989, 1990
Buick Century 1987, 1988
Oldsmobile Ciera 1987, 1988, 1989
Cadillac Cimarron 1987, 1988
Chevrolet Corsica 1987, 1988, 1989, 1990, 1991, 1992, 1993
Oldsmobile Cutlass (Ciera) Cruiser 1988, 1988, 1989, 1989
Oldsmobile Cutlass Ciera 1987, 1988, 1989
Pontiac Firebird 1990, 1991, 1992
Pontiac Firebird Trans Am 1990, 1991, 1992
Oldsmobile Firenza 1987
Buick Skyhawk 1987
Pontiac Sunbird 1991, 1992, 1993
Pontiac Tempest 1987, 1988, 1989, 1990, 1991
Post by: Fierofool on June 21, 2011, 10:56:38 am
.JPG)
Post by: Donster on June 21, 2011, 11:32:38 am
\D
Post by: TopNotch on June 21, 2011, 11:55:49 am
Production has been suspended and the above link has been deactivated.
Post by: TopNotch on June 21, 2011, 02:21:12 pm
Production suspended. Not available at this time.
Post by: Flyboy81 on October 24, 2011, 12:21:48 pm
Post by: Fierofool on February 11, 2012, 09:59:26 pm
Post by: LostNotForgotton on March 04, 2013, 11:29:29 am
Post by: Fierofool on January 06, 2014, 10:38:25 am
Post by: scottb on October 09, 2017, 05:52:25 pm
Post by: GTRS Fiero on October 09, 2017, 06:02:30 pm
http://www.gafiero.org/bbs/index.php?topic=2788.msg26008#msg26008 (http://www.gafiero.org/bbs/index.php?topic=2788.msg26008#msg26008)
Post by: Fierofool on October 09, 2017, 06:47:49 pm
Post by: scottb on October 10, 2017, 07:41:13 pm
Post by: Fierofool on October 10, 2017, 08:18:29 pm
I have everything to do mine, including DIS, but just don't have the funds to pay someone to do it.
Post by: GTRS Fiero on October 10, 2017, 09:13:58 pm
Post by: GTRS Fiero on October 14, 2017, 10:51:10 pm
Updated look:
Post by: oldone on October 15, 2017, 10:15:13 pm
Post by: GTRS Fiero on October 15, 2017, 10:19:06 pm
This uses coil packs, or DIS (Distibutorless Ignition System). The distributor is no longer required. Nor is the failure-prone ICM. You can see the coil packs at the bottom of the picture, against the trunk wall. Their ICM is the base of the coil pack.
Post by: Fierofool on October 15, 2017, 10:31:58 pm
Post by: GTRS Fiero on November 16, 2017, 09:44:54 am
Post by: GTRS Fiero on August 07, 2018, 10:07:23 pm
Post by: GTRS Fiero on November 12, 2018, 10:24:44 pm
Post by: Lurate on January 11, 2019, 10:09:58 pm
Click here (http://gafieroclub.org/DigitalEgr.pdf) to see a PDF document with a list of cars that use a digital EGR that can be used with the adapter plate. If you want to save the document, right click on the link and select "Save target as" or "Save link as" from the menu that pops up.
Are all of those on the list compatible with the 7730 ECM conversion?
Post by: GTRS Fiero on January 11, 2019, 10:12:13 pm
Post by: scottb on July 22, 2019, 06:14:09 pm
Post by: Fierofool on July 22, 2019, 07:46:46 pm
I kept the one that came off my 3.4 but I've also collected a few more just in case it was a bad EGR. At the time I got mine about 5 years ago there was no trouble in finding them all through the Pull a Part yard. Most late 80s-early 90s seemed to have them.
Post by: GTRS Fiero on July 22, 2019, 08:03:32 pm
Post by: GTRS Fiero on July 22, 2019, 09:44:12 pm
Post by: scottb on July 23, 2019, 08:06:37 pm
Post by: GTRS Fiero on July 23, 2019, 08:15:50 pm
The vacuum EGR seems to always be rusty, although I did see someone had a chrome EGR.
Post by: Fierofool on July 23, 2019, 10:23:07 pm
Post by: GTRS Fiero on November 23, 2019, 08:47:37 am
I have not been able to find a cover for the digital EGR.
Anyway, bumping this to the top.
Post by: Fierofool on November 23, 2019, 09:34:50 am
Post by: GTRS Fiero on November 23, 2019, 09:38:11 am
Post by: Fierofool on November 23, 2019, 12:19:57 pm
Post by: GTRS Fiero on November 23, 2019, 12:22:23 pm
Post by: Fierofool on May 14, 2020, 10:38:42 pm
Post by: GTRS Fiero on May 15, 2020, 12:25:08 am
Post by: GTRS Fiero on January 06, 2021, 08:45:38 pm
Quote from: Fierofool
...explain the shininess with "The old one kept blowing gaskets so I had to get a new one."
Funny. Almost what happened to me.
Post by: GTRS Fiero on January 13, 2021, 08:26:06 am
Post by: Fierofool on January 13, 2021, 08:41:45 am
I'm sure that someone somewhere would be willing to make one, of course.
Post by: Fierofool on January 13, 2021, 09:09:50 am
One scenario I presented on PFF is that a Duke emissions decal be placed on the decklid with the explanation that the decklid had been replaced at some time. Only a Fiero knowledgeable person would know that a Fastback decklid never came with a Duke engine.
Post by: Wreck It Ralph on January 13, 2021, 09:50:53 am
Post by: Fierofool on January 13, 2021, 10:58:18 am
Post by: GTRS Fiero on January 13, 2021, 07:30:49 pm
It's certainly possible, but may be illegal. I contacted someone who was doing reproduction stickers throughout the Fiero. Things like the tags for tire size and pressures, the coolant stickers up front, etc. I asked about the RPO sticker on the left front fenderwell and they said it was illegal to reproduce it.
I'm sure that someone somewhere would be willing to make one, of course.
JohnWPB had offered RPO stickers. I have one. It is slightly a different size. He said just stick it over the existing sticker. There were some issues with his sticker, and the factory sizes apparently varied.
Post by: GTRS Fiero on January 13, 2021, 07:31:57 pm
Currently, there's a discussion on PFF about the adapter kit and California emissions. We have sold a number of units going to California, so certainly some if not all are getting emissions approval. There is a photo posted of the emissions sticker that's supposed to be on the decklid of a Fiero and it clearly shows the stock EGR system. That sticker could be modified and reproduced to show the old vacuum lines removed, along with the solenoid and distributor and a EGR valve/solenoid in place.
One scenario I presented on PFF is that a Duke emissions decal be placed on the decklid with the explanation that the decklid had been replaced at some time. Only a Fiero knowledgeable person would know that a Fastback decklid never came with a Duke engine.
I want a sticker that shows the current EGR and belt systems.
Post by: GTRS Fiero on January 13, 2021, 07:32:43 pm
Post by: GTRS Fiero on January 16, 2021, 11:40:05 am
Post by: Fierofool on January 16, 2021, 04:11:09 pm
Post by: GTRS Fiero on January 16, 2021, 04:37:06 pm
Post by: Fierofool on January 04, 2022, 01:06:29 pm
Post by: montegut on January 04, 2022, 01:35:25 pm
Post by: Fierofool on January 04, 2022, 01:59:05 pm
Post by: Fierofool on January 04, 2022, 02:00:14 pm
Post by: Fierofool on January 09, 2022, 10:26:42 pm