Post by: FieroGTLT1 on August 21, 2013, 08:09:20 pm
And I was responded by many great people in the area of Atlanta,Augusta,Douglasville,Lawrenceville.Two of the
members in particular "FieroFool" and "Top Notch" urged me to go ahead and join the Georgia Fiero Forum now to get me all ready to go. ;D Thank You very much for reaching out.
With that being said I was contacted recently about my Center Console Skeleton build by "FieroFool" to go ahead and post on here for the members that don't frequent Pennock's.Plus to get me more familiar to the people
of the Georgia Fiero Club.These will be made in 3 or 4 seperate pieces for easier installation and made so you can work on the shifter cable without taking the entire console and skeleton out.Plus they are going to be built with threaded inserts for machine thread cap screw versus just being drilled for holes that can easily be cross threaded and eventually have broken off tabs and then the infamous "JBWeld" holding everything together.
(http://s1312.photobucket.com/user/fierogtlt1/media/BothSkeletons1_zps2c2b81d2.jpg.html)Here is a picture of the original skeleton and the template from above to compare the size and pattern.
Post by: Fierofool on August 21, 2013, 09:25:19 pm
Can the area that houses the switches and the shifter and ashtrays be swapped out without changing out everything else, for that custom look should someone want to change the layout?
Post by: FieroGTLT1 on August 22, 2013, 09:59:43 pm
switches cut into the shift plate without the use of the lower mounting plate.As for the
skeleton,it is the same weather it is a auto or manual trans.The upper seperate part can be cut with the stereo on the top position or the bottom one.Or the option of a double
DIN stereo,then just cut a new faceplate.Plus I am in the process of rewiring the door
lock switches and moving them to the center console with the other switches.The power window/mirror switches can pretty much be moved anywhere.
Post by: FieroGTLT1 on September 23, 2013, 06:08:19 pm
start cutting some plastic this week.
Post by: FieroGTLT1 on June 16, 2014, 10:43:26 pm
Post by: Fierofool on June 16, 2014, 11:00:12 pm
Post by: FieroGTLT1 on June 17, 2014, 12:33:08 am
Hey, man, good to see you back. I just sent you an email less than an hour ago to see if you were OK. No real need to hurry. Take your time and get it right. Hope moving up here is still in your future.Thank You a lot .I just found your E-Mail that you sent me today.My health has gotten better and I am totally healed from my hand surgery but I will be going back to my hand surgeon this Thursday to see if I need to get my other two fingers done the same way.My wife and I are definitely still thinking about moving up there " Hopefully in 2014 ".I hope the Center Console Skeleton project comes out good enough to be shared with the Fiero community since no company or individual is currently producing this
much needed item. P.S. Thank You again for the oxygen supplies you sent me.They worked perfect for me. Todd Mullenaux.
Post by: WV Mike on June 21, 2014, 10:07:46 am
Post by: LostNotForgotton on July 28, 2014, 01:55:00 pm
http://www.gafiero.org/bbs/index.php?topic=1495.msg14564#msg14564
Post by: FieroGTLT1 on July 28, 2014, 04:19:55 pm
Post by: FieroGTLT1 on August 07, 2014, 01:03:05 am
(http://s1312.photobucket.com/user/fierogtlt1/media/SANY0825_zps409fd73a.jpg.html)Bottom of the original piece.
(http://s1312.photobucket.com/user/fierogtlt1/media/SANY0827_zpsaca1bf9b.jpg.html)Bottom of the new casted part.
(http://s1312.photobucket.com/user/fierogtlt1/media/SANY0826_zps46fcf090.jpg.html)Top of the original piece.
(http://s1312.photobucket.com/user/fierogtlt1/media/SANY0830_zps66b088b1.jpg.html)Top of the new casted part.
(http://s1312.photobucket.com/user/fierogtlt1/media/SANY0831_zps29a47ce8.jpg.html)Back tabs made thicker.Will keep the tabs from breaking as easy.
That's all I have for now until Friday or Saturday. :D
Post by: f85gtron on August 12, 2014, 06:45:45 am
I'm interested in the one that flips the radio with the hvac controls, double din. If that was sold in a package with a faceplate, that might be a popular item.
Keep us posted.
Ron
Post by: FieroGTLT1 on August 21, 2014, 05:57:59 pm
Hopefully when I get it biopsied next week it will turn out to be benign and not cancerous.So now I am majorly in a
deep depression till I find out what is what.So I don't feel like working on any kind of project at this time.
Post by: Fierofool on August 21, 2014, 07:39:09 pm
Post by: Roger on August 21, 2014, 08:03:33 pm
Keep us in the loop.
Post by: FieroGTLT1 on August 22, 2014, 01:26:09 am
I will be praying for you that it isn't cancerous and to lift your spirit.Thank You very much Charlie for the thoughts and prayers.
Post by: FieroGTLT1 on August 22, 2014, 01:28:58 am
Hopefully it is benign. We'll put you on our prayer list too. Don't be depressed, live life like you love it.Thank You very much Roger for the prayers....I just hope it turns out to be nothing,but till I find out next week I am very very nervous about the outcome.
Keep us in the loop.
Post by: FieroGTLT1 on August 26, 2014, 08:49:11 pm
I get my results this Thursday from the Oncologist to see if it is cancerous or not.It seems to be getting bigger.
It is about the size of a golfball now.I came home from the Doctors and took a Oxycodone and went to sleep.Thusday can't get here fast enough.I will try to get back to this project ASAP.But I might hav to take a break if it comes up positive.
Post by: Fierofool on August 26, 2014, 09:45:01 pm
Post by: FieroGTLT1 on August 28, 2014, 03:58:10 pm
I go to see a specialist tomorrow about seeing what route I need to go as in Chemo/Radiation or surgery to remove the
cancerous tumor from my neck.Hopefully they can just cut it out and that's it.But then again whatever they do to stop it from growing is fine to me.Thank You for your prayers and support ......Todd Mullenaux.
Post by: Roger on August 28, 2014, 06:36:27 pm
Roger
Post by: FieroGTLT1 on August 31, 2014, 07:53:15 pm
Post by: WV Mike on September 01, 2014, 08:57:37 am
Post by: FieroGTLT1 on September 08, 2014, 02:28:56 pm
Post by: Roger on September 08, 2014, 05:59:48 pm
Post by: Fierofool on September 08, 2014, 08:03:22 pm
Post by: FieroGTLT1 on September 11, 2014, 09:56:11 pm
Post by: Roger on September 12, 2014, 05:12:01 am
Post by: FieroGTLT1 on October 19, 2014, 01:35:38 pm
So far so good.......Hopefully by the end of November I will be done and say I am cancer free.
Post by: Roger on October 19, 2014, 07:32:45 pm
Post by: FieroGTLT1 on November 01, 2014, 07:30:16 pm
(http://s1312.photobucket.com/user/fierogtlt1/media/SANY0890_zpsc8fdb141.jpg.html)
Post by: Roger on November 01, 2014, 08:27:35 pm
Post by: Fierofool on November 01, 2014, 08:34:15 pm
Post by: Raydar on November 02, 2014, 01:00:17 am
Take care. Y'all are still in my prayers. :)
Post by: FieroGTLT1 on November 03, 2014, 06:33:05 pm
Post by: FieroGTLT1 on November 29, 2014, 01:38:49 pm
(http://s1312.photobucket.com/user/fierogtlt1/media/SANY0909_zps08243573.jpg.html)
Post by: Fierofool on November 29, 2014, 06:35:47 pm
Post by: FieroGTLT1 on December 08, 2014, 05:55:31 pm
An amazing transformation. You look like the Dalai Lama. Hope that's not the chemo in that bottle. :P\
No...It's Lipton ice tea....I have to start a new chemo cocktail starting tomorrow morning.I have to get some fluids and then I have to wear a machine home for 24 hours and then come back on Friday to have them remove it from my port in my chest.This is going to happen every Tuesday.I don't know how much longer I will be doing chemo for,but at least the head and neck cancer is totally gone.Noe just to get rid of the bone and liver cancer.Hopefully 2015 is better than this year has been. ;)
Post by: FlatBLK88fieroGT on December 14, 2014, 11:38:38 am