Georgia Fiero Club Forum

All Things Fiero => Tech Tips, Tech Questions => Topic started by: GTRS Fiero on February 24, 2019, 09:34:36 am

Title: FPR housing
Post by: GTRS Fiero on February 24, 2019, 09:34:36 am

I'm looking for the actual FPR housing--not the diaphragm.  Somehow both the brand new adjustable one and my spare went missing during the swap.  I cannot even find a part # for the housing.

Title: Re: FPR housing
Post by: GTRS Fiero on February 26, 2019, 12:03:37 am

Is there some reason that the housing isn't available?  I looked through the P22.  Almost everything on F-11 or whatever page was N.S.  It seems to me that that the cold start is in the wrong place.

Title: Re: FPR housing
Post by: GTRS Fiero on February 28, 2019, 06:08:47 pm

Well, it looks as if I'll be getting a Holley.  I'm guessing I can use a gauge to get it adjusted to stock pressure.

Title: Re: FPR housing
Post by: Fierofool on February 28, 2019, 07:41:46 pm

Give me a day or two.  I have a fuel rail that had some metal missing in the injector ports and I felt the O-rings might leak.  I gave it to Mike to get the regulator from.  I think I got it back and still have it.  The rail is useless, so I'll pull the cap off the regulator.  You do know that the screws are Torx Safety Screws, don't you.  A regular Torx bit won't work. 

I have to go for some lab work tomorrow and Saturday paying a visit to Scott's Fiero Shop. 

Title: Re: FPR housing
Post by: GTRS Fiero on February 28, 2019, 07:51:28 pm

Yes, I'll have to get the tool from TFS.

"Scott's Fiero Shop"?  I know he has a shop, but didn't know it was dedicated to Fieros.

Title: Re: FPR housing
Post by: Fierofool on February 28, 2019, 07:56:18 pm

Well, except for that old El Camino, a Fiero or two is all that's in there. 

Title: Re: FPR housing
Post by: GTRS Fiero on February 28, 2019, 08:14:31 pm

Like this?