Georgia Fiero Club Forum

All Things Fiero => General Fiero Discussion => Topic started by: Wreck It Ralph on November 23, 2020, 07:57:37 am

Title: West coast Tach board install
Post by: Wreck It Ralph on November 23, 2020, 07:57:37 am

So I put back together my center console and what better time to rip something else apart. 😂 I pulled the gauge cluster to check out the lights and tach. I bought a new tach board from West Coast. First photo is the original then the new one. It has a pot to fine tune it but came tuned for an 88 4cyl. Also has a diagnostic led... since all but 3 bulbs were blown I didn’t finish reinstalling it last night.

Title: Re: West coast Tach board install
Post by: GTRS Fiero on November 23, 2020, 05:58:59 pm

Did I miss seeing the original board?

Title: Re: West coast Tach board install
Post by: Wreck It Ralph on November 23, 2020, 07:11:38 pm

First photo

Title: Re: West coast Tach board install
Post by: GTRS Fiero on November 23, 2020, 07:14:02 pm

Ah.  That is the old board.  I was expecting to see both in the same pic.

Interested in how you like the new board.

Title: Re: West coast Tach board install
Post by: Wreck It Ralph on November 23, 2020, 07:17:57 pm

Note for future photos.