Post by: GTRS Fiero on January 01, 2021, 08:31:29 am
Post by: Fierofool on January 01, 2021, 09:51:48 am
Post by: GTRS Fiero on January 01, 2021, 10:29:19 am
This isn't a spanner wrench. I have one of those, but this isn't it.
Post by: GTRS Fiero on January 01, 2021, 10:29:40 am
Post by: GTRS Fiero on January 01, 2021, 10:30:03 am
I thought this was for the rack.
Post by: GTRS Fiero on January 01, 2021, 10:31:09 am
This worked very well for removing the straps on this month's 20-piece wrench set.
Post by: Wreck It Ralph on January 01, 2021, 12:07:53 pm
Mystery tool 4:
This worked very well for removing the straps on this month's 20-piece wrench set.
Door/panel removal tool. To pop clips/pins without breaking them.
Post by: Wreck It Ralph on January 01, 2021, 12:09:30 pm
Mystery tool 2:
Another clip/pin popper. Normally for the kind like you pull a pin out of the clip to release it.
Post by: Wreck It Ralph on January 01, 2021, 12:13:07 pm
Mystery tool 3:
I thought this was for the rack.
Yep. Rack tool
Post by: Wreck It Ralph on January 01, 2021, 12:15:34 pm
Mystery tool 1:
This isn't a spanner wrench. I have one of those, but this isn't it.
Just a thin wrench to get into a tight place or a cap/cover/short head bolt. Can’t say where but I know when you need it then it will be a god send.
Post by: GTRS Fiero on January 01, 2021, 12:19:49 pm
Mystery tool 4:
This worked very well for removing the straps on this month's 20-piece wrench set.
Door/panel removal tool. To pop clips/pins without breaking them.
Oops. I broke the straps. Tool abuse!
Post by: GTRS Fiero on January 01, 2021, 12:20:32 pm
Mystery tool 2:
Another clip/pin popper. Normally for the kind like you pull a pin out of the clip to release it.
Ah. For the wheel well liners.
Post by: Fierofool on January 01, 2021, 01:47:08 pm
Mystery tool 2:
Another clip/pin popper. Normally for the kind like you pull a pin out of the clip to release it.
Ah. For the wheel well liners.
Also for the fasteners used for the rear fascia. May be some of those on the front fascia, too.
Post by: scottb on January 01, 2021, 03:39:48 pm
Post by: GTRS Fiero on January 01, 2021, 03:41:23 pm
Post by: Fierofool on January 01, 2021, 03:44:16 pm
Post by: scottb on January 01, 2021, 03:48:50 pm
Hmmm. Or angle grinder blades.
Screw on grinder attachments generally use a 3/4 inch wrench
Post by: scottb on January 01, 2021, 03:49:49 pm
My Honda Accord, Honda motorcycle and 2 Yamaha motorcycles had wrenches like that.
Honda bikes have changeable table saw blades??????
Post by: Fierofool on January 01, 2021, 03:59:36 pm
Post by: scottb on January 01, 2021, 06:38:33 pm
Post by: GTRS Fiero on January 01, 2021, 10:48:21 pm