Georgia Fiero Club Forum

All Things Fiero => Tech Tips, Tech Questions => Topic started by: Wreck It Ralph on January 03, 2021, 11:50:04 pm

Title: Refinish wheels tips please
Post by: Wreck It Ralph on January 03, 2021, 11:50:04 pm
I’m going to put the 15” wheels from the GT on my 88. I want to paint them black with red accents. Any advice on stripping and painting them?

Below is an example of the type of wheel.

Also where does one get the center caps?
Title: Re: Refinish wheels tips please
Post by: GTRS Fiero on January 04, 2021, 12:41:51 am
TFS.
Title: Re: Refinish wheels tips please
Post by: Raydar on January 04, 2021, 08:51:45 am
I put this together a while back. Mostly still true.
http://www.fiero.nl/cgi-bin/main.cgi?WheelPolishing
Title: Re: Refinish wheels tips please
Post by: Wreck It Ralph on January 04, 2021, 10:15:19 am
I put this together a while back. Mostly still true.
http://www.fiero.nl/cgi-bin/main.cgi?WheelPolishing

Good stuff. Thank you.
Title: Re: Refinish wheels tips please
Post by: Raydar on January 04, 2021, 01:38:56 pm

Good stuff. Thank you.

Thanks.
Have fun. It's... time consuming.
It was about this time of year when I did mine. Froze my a55 off.
Title: Re: Refinish wheels tips please
Post by: Wreck It Ralph on January 04, 2021, 04:00:26 pm

Good stuff. Thank you.

Thanks.
Have fun. It's... time consuming.
It was about this time of year when I did mine. Froze my a55 off.


With my shop almost ready I’ll be able to stay good and warm plus a bit high. 😂 Don’t worry I’m putting in a ventilator.
Title: Re: Refinish wheels tips please
Post by: Raydar on January 04, 2021, 04:37:53 pm
...
With my shop almost ready I’ll be able to stay good and warm plus a bit high. 😂 Don’t worry I’m putting in a ventilator.

Aircraft stripper fumes are a thing. Seriously.
My wife heard the buzz all the way upstairs. :D
Title: Re: Refinish wheels tips please
Post by: GTRS Fiero on January 04, 2021, 06:08:56 pm
I put this together a while back. Mostly still true.
http://www.fiero.nl/cgi-bin/main.cgi?WheelPolishing

Also in the September 2018 newsletter, with some updates.