Georgia Fiero Club Forum

All Things Fiero => The Market => Topic started by: Raydar on April 15, 2014, 07:31:52 pm

Title: Looking for the rectangular caps that cover the tail light screws.
Post by: Raydar on April 15, 2014, 07:31:52 pm

As the subject says... The dark gray / black caps that cover the tail light screws.
They are in the panel above the tail lights.
I need at least one, but wouldn't mind having a spare or three.
(I had a taillight screw that was not threaded properly, and backed out, knocking the plug out.)

Thanks!
Steve

Title: Re: Looking for the rectangular caps that cover the tail light screws.
Post by: Fierofool on April 15, 2014, 07:57:59 pm

I have a few.

Title: Re: Looking for the rectangular caps that cover the tail light screws.
Post by: Raydar on April 15, 2014, 08:40:56 pm

Cool. Thank you sir. How much?
Just bring them to the next meeting if you don't mind.

Title: Re: Looking for the rectangular caps that cover the tail light screws.
Post by: Fierofool on April 15, 2014, 09:06:02 pm

How about a handshake?  Whatever you find in your hand when you pull it back, you can keep. 


Better email or call me before the meeting to remind me. 

Title: Re: Looking for the rectangular caps that cover the tail light screws.
Post by: Raydar on April 15, 2014, 09:12:08 pm

Thanks Charlie. I'll remind you.

Title: Re: Looking for the rectangular caps that cover the tail light screws.
Post by: Fierofool on April 19, 2014, 11:28:21 am

I grabbed one of the caps from the 86SE as Randy and Scott hauled it away this morning.  I didn't realize you wanted more than 1.  The ones I have were in a bucket of nuts and bolts and screws that I got in a package deal.  Slightly scuffed and scratched up.  Email or pm Randy and have him pull the rest and bring them to the meeting.  I couldn't find them listed in the pullapart price guide, so I guess there're free. 

Title: Re: Looking for the rectangular caps that cover the tail light screws.
Post by: MetalBlue85GT on April 20, 2014, 07:16:21 am

Raydar,

There are 5 left on the car. I am about 30 miles north of you if you want to stop by for anything else lemme know. See post in Member only section.

Title: Re: Looking for the rectangular caps that cover the tail light screws.
Post by: Raydar on April 21, 2014, 09:10:29 pm

Thanks guys.
All I really need is one. Just wanted a couple to have as spares, in case my taillight screws decide to do the dance again.
No hurry. I should be at the next meeting.

Title: Re: Looking for the rectangular caps that cover the tail light screws.
Post by: GTRS Fiero on December 30, 2017, 06:03:38 pm

Do these screws come loose?

I'm considering making better heads on these.  Perhaps hex.

I'm also wondering if anyone has found a good source for the covers, before I refinish mine.

Title: Re: Looking for the rectangular caps that cover the tail light screws.
Post by: oldone on December 30, 2017, 07:56:30 pm

I`ve got a couple you can have.

Title: Re: Looking for the rectangular caps that cover the tail light screws.
Post by: GTRS Fiero on December 30, 2017, 09:22:12 pm

Thanks for the offer, but I'm looking for new.  Mine are fine, if used, but I keep thinking....

Title: Re: Looking for the rectangular caps that cover the tail light screws.
Post by: Raydar on January 02, 2018, 09:13:04 am

Quote from: GTRS Fiero on December 30, 2017, 06:03:38 pm

Do these screws come loose?
...

Not normally.
One of my tail lights had a broken plastic piece, where the "spring nuts" (for lack of a better description) are fastened.
Made it hard to thread the screw into the nut. (Usually it would miss.)
Allowed the screw to vibrate and back itself out.

Title: Re: Looking for the rectangular caps that cover the tail light screws.
Post by: oldone on January 02, 2018, 11:24:00 pm

like I said steve I`ve got two you can have.

Title: Re: Looking for the rectangular caps that cover the tail light screws.
Post by: Raydar on January 03, 2018, 09:57:07 am

Thanks Dewey. I think I'm good, now.
I appreciate it.