Post by: Tha Driver on May 19, 2017, 06:50:01 am
1) 4 very good 14" tires on Fiero wheels. 2 Kumho 195/70 R 14s, & 2 BF Goodrich Comp T/A 215/60 R 14s. Have some paint on them so I'll let them go for $125.
2) Modified wing with taller rear lip & adjustable wing stands. $125.
3) Fiberglass sunroofs with dual scoops. Different thicknesses take your pick. $50 each.
4) Smooth molding GT/Aero bumpers & eggcrates. $100 front, $75 rear.
5)
6) 4T60 4-speed auto. Not E or HD so no programing needed. Known good - $200.
7) Front GT inner fenders. One has a broken spot but can be fixed. $35.
8) COMPLETE '86 front suspension. Even has the calipers & steering rack. $150.
9) 7" tall solid plastic wing stands. $75.
10) AC lines - whole bunch of them. $75.
11)
12) Fiberglass hood extension. Covers the wipers - inner & outer pieces. $150.
13) Getrag special rebuild tools. Miller 8998 Getrag G2 88. Two carrying cases full of specialized tools. $150.
You can PM me or email me at ImThaDriver at yahoo.
Thanks,
~ Paul
aka "Tha Driver"
Custom Fiberglass Parts (http://angelonearth.net/customfiberglass/)
Post by: GTRS Fiero on May 19, 2017, 07:01:34 am
What year is the 4T60?
Post by: Tha Driver on May 19, 2017, 10:59:01 am
I'm curious about #12. Do you have a pic?
What year is the 4T60?
Haven't taken any pics yet. I have to re-boot my computer in Windoze (I use Ubuntu instead) to upload them, & that usually takes a while as it always seems to need to search for updates & then install them every time I start it. :(
No Idea what year the 4T60 is.
Swing by & check everything out & check out my projects while you're here. Worth a few "wows" at least... :D
~ Paul
aka "Tha Driver"
Custom Fiberglass Parts (http://angelonearth.net/customfiberglass/)
Post by: Raydar on May 19, 2017, 03:17:51 pm
Post by: GTRS Fiero on May 19, 2017, 05:08:34 pm
Swing by & check everything out & check out my projects while you're here. Worth a few "wows" at least... :D
~ Paul
I'm about 8 hours away. A bit too far for swinging by, or I'd have stopped by to see your Indy.
Post by: Tha Driver on May 20, 2017, 11:06:11 am
Thanks,
Paul
Post by: GTRS Fiero on May 20, 2017, 11:07:13 am
Post by: Cyb3rw0lf on May 20, 2017, 03:52:08 pm
Post by: GTRS Fiero on May 20, 2017, 04:25:07 pm
Post by: GTRS Fiero on May 21, 2017, 10:01:50 am
All you should need is an application to resize the pictures. I use 800 for the width, so it doesn't make the text small.
Post by: Cyb3rw0lf on May 21, 2017, 10:39:51 pm
Post by: Tha Driver on May 21, 2017, 11:01:32 pm
I'm curious why you can't post from Ubuntu. It's a fine OS for workstations. Lots of custom animations, like having closed windows explode or become paper airplanes. Lots of window control. Oh, and FTP is great.
All you should need is an application to resize the pictures. I use 800 for the width, so it doesn't make the text small.
My Ubuntu install has a problem. I get an error every time I boot, & periodically. I can't download new software.
I have the pics ready to email - where should I send them (you don't have an email shown).
Funny this computer is one of the few factory-built ones I've owned, & it has never run right. Like I said Windoze is constantly updating every time I boot it, or it has problems. Most all my other computers that I've used over the years I built myself, & never had any problems with them until hardware failure.
Thanks,
~ Paul
aka "Tha Driver"
Custom Fiberglass Parts (http://angelonearth.net/customfiberglass/)
Post by: GTRS Fiero on May 21, 2017, 11:10:15 pm
If you have your email up, I'll just reply to your last email, and you can reply to me.
Post by: Tha Driver on May 22, 2017, 03:02:06 pm
Ubuntu should be easy to reload.
If you have your email up, I'll just reply to your last email, and you can reply to me.
I think my Ubuntu CD has a problem which kept it from installing properly (or completely). I probably need to download the OS again & try to burn a new CD.
Pics sent to your email of the hood extension & trans tag.
~ Paul
aka "Tha Driver"
Custom Fiberglass Parts (http://angelonearth.net/customfiberglass/)
Post by: GTRS Fiero on May 22, 2017, 06:08:05 pm
Post by: GTRS Fiero on May 22, 2017, 06:08:47 pm
Post by: Tha Driver on May 22, 2017, 09:41:59 pm
Post by: GTRS Fiero on May 22, 2017, 09:51:59 pm
Post by: Raydar on May 22, 2017, 10:50:10 pm
Looks like the code is "BDH".
BFH, BCH, BDH Buick 3.8 V6 (High Altitude) A-Body: Oldsmobile, Buick
Differential Ratio: 2.84 Sprocket ratio: 35/35 FDR: 2.84 Converter Code: FL4B Stall speed: 1895
From: http://www.60degreev6.com/vb5/articles/transmissions-ab/424695-4-speed-transaxle-info/contentpage3
This would be a superb fuel economy trans.
Post by: Tha Driver on May 23, 2017, 02:38:51 am
I must be dense. I'm not getting it.
Look at the difference in the distance from the rubber bumper to the rear of the hood, & you'll see the bottom piece that fills that in.
Thanks,
Paul
Post by: GTRS Fiero on May 24, 2017, 07:51:43 pm
Post by: Raydar on May 24, 2017, 10:07:24 pm
Did you figure out a year for the 4T60?
The table I posted quoted 1986, but I saw a reference to that RPO for several years, more recent than that. Think I saw an '89 or '90.
Post by: GTRS Fiero on May 24, 2017, 10:32:53 pm
Post by: scottb on May 25, 2017, 05:44:36 pm
[/quote]
BFH,
[/quote]
I think my car came with that code.........
Post by: GTRS Fiero on May 31, 2017, 09:00:31 pm
Post by: Tha Driver on May 31, 2017, 09:56:29 pm
My mig welder broke so if anyone has one to trade I'm up for offers.
~ Paul
aka "Tha Driver"
Custom Fiberglass Parts (http://angelonearth.net/customfiberglass/)
Post by: GTRS Fiero on May 31, 2017, 10:11:06 pm
Post by: Raydar on May 31, 2017, 10:33:20 pm
I thought they were still the 440T4 in '86.
Except for incremental improvements, year-to-year, to help the durability, the 440T4 and the 4T60 were the same trans. Just the nomenclature changed. (Pardon, if that's what you meant.)
Post by: GTRS Fiero on May 31, 2017, 10:36:30 pm