Topics

1

The Market / 2.8L GT Injectors

« on: February 25, 2021, 07:59:15 pm »

Looking to see if anyone has their hands on a spare set, or if they know anyone that has a set. Any stock replacement set would work!

2

Tech Tips, Tech Questions / EGR Solenoid Bracket Bolt

« on: October 07, 2020, 06:12:47 pm »

Does anyone know where to get tla replacement for the 15mm solenoid bracket? Or possibly the dimensions to pick up a close match? The head broke off of mine. Any help is appreciated.

3

Tech Tips, Tech Questions / AC Valve Core Removal

« on: August 10, 2020, 05:14:45 pm »

I'm currently doing an AC retrofit to convert from r12 to r134a so I'm attempting to remove the valve cores before fitting the adapters. I'm able to start unscrewing the core with a core removal tool, but the thread seems to stop after I get it to the point shown in the attached image. I can feel the thread with the tool to tighten it back up or to loosen it to that point, but it seems to just stop and not want to come out anymore. Do you just pull it out the rest of the way or is leaving it loose enough for the adapters and charge kit? Any help is appreciated.

4

The Market / Wanted: Lower Radiator Support

« on: July 16, 2020, 06:00:01 pm »

I'm looking for a lower radiator support bracket as mine was rusted out and crumbled when removing the radiator fan. I live in Ohio but will pay for shipping.

5

Tech Tips, Tech Questions / Replacement Weatherstrips and Trim

« on: July 12, 2020, 07:14:52 pm »

As the title states, I'm looking to replace the weatherstripping and trim. The trim I'm referring to is the plastic trim around the GT quarter panel windows and above doors. As for Weatherstrips, I know the FieroStore has a set but I wasn't sure if there's a better and/or cheaper alternative. Any help is appreciated!

6

Tech Tips, Tech Questions / Replace Steering Intermediate Shaft

« on: June 23, 2020, 04:59:34 pm »

The intermediate steering shaft is rusted out and needs replaced on my '87 GT. Because of the layout on a Fiero, it's not quite as accessible as on other cars. Is there a good way to go about this? I found the bolt (picture in attachments) that I think is what secures the entirety to the rack and pinion, on what would be considered the front portion of the firewall. The only thing I could find regarding the steering shaft in the service manual, was a single diagram (also in attachments). Any help is appreciated.

7

Tech Tips, Tech Questions / Shifter to Steering Column Cable

« on: June 13, 2020, 07:44:37 pm »

I recently had to replace my entire steering column on my auto trans GT, and when removing the cable that connects from the shifter to the steering column, the clip that keeps it secured in the slot broke off. I have a spare cable but can't find the same kind of cable anywhere to figure out how exactly to go about replacing it. I know it runs from the steering column, behind the console, and then to the shifter. Is there any good way to go about replacing this? Any help is greatly appreciated.

8

Tech Tips, Tech Questions / New Fiero Owner

« on: June 03, 2020, 01:49:03 pm »

I'm new to Fieros and have a couple of questions. I'm working on my 1987 GT and need to replace all the vacuum lines; what are the diameters of the lines including cruise control? I also have a potential small leak with my transmission pan, what are the bolt torque specs? Any help or tips would be greatly appreciated.