my engine swap

[cogcaviz24]

welp, currently the body is up the air, the cradle is on floor, and we are in the process of swapping the stuff over.


we ran into a BIG speed bump in the process of dropping the cradle. i have read horror stories of the rear cradle bolts spinning due to the nuts braking loose in the frame. our problem was the front bolts not wanting to come out. 2 hours we beat, twisted and soaked them with PB blaster. they finally came out, but man, it was brutal.

good times

[oldone]

hang in there man , you can do it      oldone in c'ville

[cogcaviz24]

thanks, i'm planning on put in a full day on it today. a little pressure washing is the first order of business

[cogcaviz24]

today, we got the engine bolted to the tranny,most all the stuff swapped over, hoses routed, harness connected to sensor, and accessories bolted up. everything is currently in the car with the 4 cradle bolts in and the struts bolted up. we are getting close.

[RobsFieros]

I don't smell smoke yet...lol
You only like a couple of hours until you smell smoke...

[cogcaviz24]

smoke?