Home
About Us
Calendar
Fiero Documents
Merchandise
Tips
Links
Members
Message Board
Other Fiero Clubs
VIN Decoder
Speed Calculator
GFC Facebook Page
 

Author Topic: All this trouble to change a $15 part.  (Read 15173 times)

0 Members and 1 Guest are viewing this topic.

TopNotch

  • The Duke of URL
  • Global Moderator
  • *****
  • Posts: 3,978
    • View Profile
All this trouble to change a $15 part.
« on: May 04, 2014, 10:22:09 pm »
There are some in the club that don't even know about my 88 t-top coupe. It's been that long since I have driven it. The throw-out bearing is bad, and changing it is a real chore.
Well, I finally found time to start the job. I found the part online for only $15 (factory close-out from Rock Auto). Here's what I have to go through to change that little part.
First, I had to disconnect everything and lift the car off the engine and transmission, which are still on the cradle...


The cradle rests on a modified Harbor Freight furniture dolly.


And now that the cherry picker has done it's job, the car rests on jack stands and a board.


Now the cradle is out from under the car, but the day is done, so the repair will have to wait for another day.

The more complex the mind, the greater the need for the simplicity of play.

Fierofool

  • Global Moderator
  • *****
  • Posts: 10,589
    • View Profile
    • Georgia Fiero Club
Re: All this trouble to change a $15 part.
« Reply #1 on: May 04, 2014, 11:27:27 pm »
I know what you mean by having to pay $1500 to get a $5 part installed.  $1500 is what was quoted for replacing the TO bearing on our 3 year old 88 Beretta.  If it would make you feel any better, I'll buy your TO bearing for $20 and sell you mine for $200.  Then the cost to work ratio will be a little better.  :)
There are three kinds of men:

1.    The ones that learn by reading.
2.    The few who learn by observation.
3.    The rest of them have to pee on the electric fence and find out for themselves.    Will Rogers

Roger

  • Paid Members
  • *****
  • Posts: 834
  • If it’s the thought that counts, think money.
    • View Profile
Re: All this trouble to change a $15 part.
« Reply #2 on: May 05, 2014, 12:09:47 pm »
OUCH!
While you are in there you might as well install a lightweight flywheel...new tranny input shaft seal...bearing arm bushings; etc.
 ;D
Those are some nice pix and that's probably the cleanest engine/cradle assembly out of a Fiero I've ever seen!
You can't fix stupid but, you can adjust it with a 2x4.

TopNotch

  • The Duke of URL
  • Global Moderator
  • *****
  • Posts: 3,978
    • View Profile
Re: All this trouble to change a $15 part.
« Reply #3 on: May 05, 2014, 02:07:03 pm »
BTW, if you need to do this,and you're tempted to grab onto the trunk latch with your cherry picker to pick up the car, DON'T! It's not that hard to remove the rear bumper cover so you can grab onto something more substantial.
The more complex the mind, the greater the need for the simplicity of play.

Raydar

  • Paid Members
  • *****
  • Posts: 2,967
    • View Profile
Re: All this trouble to change a $15 part.
« Reply #4 on: May 05, 2014, 07:20:00 pm »
Throwout bearing....
Sounds like a real bite in the posterior. Nice clean cradle.
...

pgackerman

  • Paid Members
  • *****
  • Posts: 1,558
    • View Profile
Re: All this trouble to change a $15 part.
« Reply #5 on: May 05, 2014, 09:24:32 pm »
I admire your automotive skill, tenacity, and photography.

Red '88 GT 5-Speed, 7730ECM, 1.6 Rockers, and KEYLESS Entry! 
Now with a trailer hitch for my bike rack.
Southland Jubilee 2019 Best in Class

TopNotch

  • The Duke of URL
  • Global Moderator
  • *****
  • Posts: 3,978
    • View Profile
Re: All this trouble to change a $15 part.
« Reply #6 on: May 20, 2014, 10:44:09 am »
Here's an update. The car is back on the road, and runs fine. The throw-out bearing was indeed toast. The little spring clip that holds it to the fork was also broken, and the new one didn't come with a spring clip. But I was able to make a substitute out of paper clips that seems to work just fine.
The more complex the mind, the greater the need for the simplicity of play.