Home
About Us
Calendar
Fiero Documents
Merchandise
Tips
Links
Members
Message Board
Other Fiero Clubs
VIN Decoder
Speed Calculator
GFC Facebook Page
 

Author Topic: HELP, my charging light just came on and my guage shows about 10 Volts output.  (Read 15016 times)

0 Members and 1 Guest are viewing this topic.

jeff

  • Newbie
  • *
  • Posts: 6
    • View Profile
My silver 88 formula.

 I checked and the belt seems fine.   any thoughts??...  on where to take it for repair,  I live near Grant Park,,,


Many thanks, jeff

Roger

  • Paid Members
  • *****
  • Posts: 833
  • If it’s the thought that counts, think money.
    • View Profile
Sounds like part of the diode pack (rectifier) in the alternator opened. Pull the alternator and take it to Advance Auto. They will check it for free. If yours is bad, get a re-manufactured unit...NOT a re-built unit.

BTW: Be sure to remove the Negative wire from the battery before you attempt to remove the alternator.

Forgot to add: The '88 has a Delco CS-130D alternator. Most GM cars use that now. You just have to be absolutely certain that the mounting piers match. You can clock any of them to match yours.
« Last Edit: June 24, 2013, 09:32:58 pm by Roger »
You can't fix stupid but, you can adjust it with a 2x4.

fiero128

  • Hero Member
  • *****
  • Posts: 729
  • Giday from Aussie land
    • View Profile
    • http://hawkesburyhydrogen.com
Using a Multimeter measure the voltage of the battery when the engine running
it should be 13.8 to 14.4 volts
Like what was stated normally either the brushes or the diodes fail when the alternator fails.
There is a charging fuse that also fails.
Open circuit the charge voltage and the alternator volts climbs due to it being unloaded causing the alternator to fail
Hawkesbury Hydrogen
More Km perTank
saving money
ABN 98866913657
+61412119530
+61448119310
+61245672275