I don't know what Changed, I reconnected a plug connector but not sure if it just happened when I jumpered the ALDL to set Timing or not But,
Then engine started right up, No over rich cond. like before /Not burning my nose and eyes, Ran Smooth and very Fast 2 to 3 thousand RPM, Within 3 min. (Iwas warming it to set Timing) the Headers were Glowing red, I shut it down 30 min later I started it again and the same happened. I wondered if I may be 180 out as with a V6 and a firing order of 123456 would allow for this and not disrupt Firing order,
In the forum "Timing a v-6" thread you Comprimise between 1 and 4 So Could I be 180 out?
Do I Have a problem with the FI It's Firing ,too smooth not to be. I would assume lean is red Hot not rich and It didn't happen when it was super Rich. Fiero V6 Computer