Home
About Us
Calendar
Fiero Documents
Merchandise
Tips
Links
Members
Message Board
Other Fiero Clubs
VIN Decoder
Speed Calculator
GFC Facebook Page
 

Author Topic: Clickety-Click, but no Beepety-Beep??  (Read 16796 times)

0 Members and 1 Guest are viewing this topic.

Donster

  • Hero Member
  • *****
  • Posts: 2,042
    • View Profile
Clickety-Click, but no Beepety-Beep??
« on: February 22, 2012, 03:56:00 am »
I can hear the horn relay click, but no horn sound.
Is this the symptom of a bad relay or bad horn or something else? How can I verify? Tried another relay, same symptom, but not sure if the 2nd relay is any good, the both could be bad.
 
\D
« Last Edit: February 22, 2012, 06:47:05 am by Donster »
Life is good!

jwrape

  • Sr. Member
  • ****
  • Posts: 472
    • View Profile
Re: Clickety-Click, but no Beep Beep??
« Reply #1 on: February 22, 2012, 06:24:12 am »
I can hear the horn relay click, but no horn sound.
Is this the symptom of a bad relay or bad horn or something else? How can I verify? Tried another relay, same symptom, but not sure if the 2nd relay is any good, the both could be bad.
 
\D

Never had a actual Horn go bad. I would start with the relay
86GT Automaic 2.8L, 05, G35, 96 MZ3

TopNotch

  • The Duke of URL
  • Global Moderator
  • *****
  • Posts: 3,977
    • View Profile
Re: Clickety-Click, but no Beepety-Beep??
« Reply #2 on: February 22, 2012, 07:54:25 am »
On my 86, both horns are weak. Maybe they can go bad.
The more complex the mind, the greater the need for the simplicity of play.

jwrape

  • Sr. Member
  • ****
  • Posts: 472
    • View Profile
Re: Clickety-Click, but no Beepety-Beep??
« Reply #3 on: February 22, 2012, 07:56:23 am »
On my 86, both horns are weak. Maybe they can go bad.

from my experience, weak horn usually means a bad connection or ground. But I guess it could go bad. I think they are made up like a coil inside
86GT Automaic 2.8L, 05, G35, 96 MZ3

Fierofool

  • Global Moderator
  • *****
  • Posts: 10,578
    • View Profile
    • Georgia Fiero Club
Re: Clickety-Click, but no Beepety-Beep??
« Reply #4 on: February 22, 2012, 08:56:46 am »
It can happen with age.  The old girls hooters went south on you.  I've got a pair from my 87 if you want them. 

I replaced mine with a pair from Advance.  Same horns that are used on the DeLorean.  About $15 each.
There are three kinds of men:

1.    The ones that learn by reading.
2.    The few who learn by observation.
3.    The rest of them have to pee on the electric fence and find out for themselves.    Will Rogers

Roger

  • Paid Members
  • *****
  • Posts: 833
  • If it’s the thought that counts, think money.
    • View Profile
Re: Clickety-Click, but no Beepety-Beep??
« Reply #5 on: February 22, 2012, 11:35:04 am »
If you hear the clickety-click then the relay should be okay. Disconnect the beepety-beep connector at the beepety-beep and while someone falls asleep on the beepety-beep button, check the voltage from the connector to ground. If that's about 12 oompaty-oomps then the beepety-beeper has gone further south than it should.
Unless the ground where the beepety-beep mounts has become goopetied-up. If you remove the beepety-beep and hot wire it to the oompety-oompher, that will certify a bad beepety-beeper or ground or connector at the beepety-beeper.
You can't fix stupid but, you can adjust it with a 2x4.

Donster

  • Hero Member
  • *****
  • Posts: 2,042
    • View Profile
Re: Clickety-Click, but no Beepety-Beep??
« Reply #6 on: February 22, 2012, 11:47:13 am »
Okedy-dokey
I'll give 'er a try

Thx

\D

PS: Forums have a bad influence on not just our children's orthography, we make mistakes lickedy-split tooo
« Last Edit: February 22, 2012, 05:45:11 pm by Donster »
Life is good!

Duchess

  • Full Member
  • ***
  • Posts: 166
    • View Profile
Re: Clickety-Click, but no Beepety-Beep??
« Reply #7 on: February 22, 2012, 12:15:23 pm »
LOL Roger ...you just cracked me up  ;D.

GTRS Fiero

  • Hero Member
  • *****
  • Posts: 12,510
  • It is what it is.
    • View Profile
Re: Clickety-Click, but no Beepety-Beep??
« Reply #8 on: March 14, 2017, 08:33:19 pm »
If you hear the clickety-click then the relay should be okay. Disconnect the beepety-beep connector at the beepety-beep and while someone falls asleep on the beepety-beep button, check the voltage from the connector to ground. If that's about 12 oompaty-oomps then the beepety-beeper has gone further south than it should.
Unless the ground where the beepety-beep mounts has become goopetied-up. If you remove the beepety-beep and hot wire it to the oompety-oompher, that will certify a bad beepety-beeper or ground or connector at the beepety-beeper.

This is hilarious!

Roger

  • Paid Members
  • *****
  • Posts: 833
  • If it’s the thought that counts, think money.
    • View Profile
Re: Clickety-Click, but no Beepety-Beep??
« Reply #9 on: March 15, 2017, 04:42:42 pm »
Glad you enjoyed it!
You can't fix stupid but, you can adjust it with a 2x4.

GTRS Fiero

  • Hero Member
  • *****
  • Posts: 12,510
  • It is what it is.
    • View Profile
Re: Clickety-Click, but no Beepety-Beep??
« Reply #10 on: March 15, 2017, 06:12:54 pm »
My kids enjoyed it, too.  It's so good to laugh.