Author Topic: what to look for in winaldl data (Read 15577 times)

f85gtron · « **on:** February 03, 2014, 10:49:48 pm »

what value targets should i look for when reading winaldl data?

f85gtron · « **Reply #1 on:** February 12, 2014, 11:23:47 am »

thanks. ogre on another site for responding to my question. his response lead me here http://fierocave.home.comcast.net/%7Efierocave/scanit.htm . from this, i learned to look at both int and blm #s. int is around 140 and blm is pegged at 120. so, looks like there is a problem. I'm not sure where the numbers are pointing, but i know they're off. any suggestions?
no codes are set.

Fierofool · « **Reply #2 on:** February 12, 2014, 12:44:51 pm »

Raydar does some chip burning and adjusting codes, so he may be able to give some advice. With this ice storm, he's probably down in the dungeon at Georgia Power, monitoring the grid.

f85gtron · « **Reply #3 on:** February 12, 2014, 07:11:47 pm »

that would be a big help. I'm learning....but it's slow going

Ron

News:

Author Topic: what to look for in winaldl data (Read 15577 times)

f85gtron

what to look for in winaldl data

f85gtron

Re: what to look for in winaldl data

Fierofool

Re: what to look for in winaldl data

f85gtron

Re: what to look for in winaldl data