Four Truck Loads of Fiero Parts--Free

[f85gtron]

The coolant pipe will work, just the tabs won't bolt up all the way...i think?

[Fierofool]

Check with Robbie.  There's a very good possibility he has one in his garage.

[Roger]

If you're after a used coolant crossover pipe you are wasting your time. If the one you find isn't rusted through, it soon will be. Your best bet is to get the stainless steel model from Rodney Dickman.

[f85gtron]

Are there throttle body's (v6) and upper plenums in there? If so, i need two and two....for project.

[Fierofool]

If there are none in the barn, I have several of each. 

[Robs Fieros]

I might have one in my garage, but it's been out of the weather for 4 years now.

[Fierofool]

I did see several when I was up there. 

[Raydar]

A friend is looking for a pretty much complete interior. Console pieces, skeleton, A and B pillar trim, etc., etc.
Everything except the dash and cluster. (He "rescued" a gutted out GT that was going to be used as a race car.)

Does anyone remember if any or all of that stuff is there?

I could also possibly use a gray shift console. I don't need the console plate, just the soft surround.

Thanks.

[Sarge]

I recall some interior parts, maybe A-pillar plastic in gray, shifter surround, trim plates for the radio/heater. (Can anyone else verify my memory is really weak)

[f85gtron]

Any timing chain covers?  I'm looking for an 87-88 in order to keep the 3.4 oil pan and more importantly, the GASKET that 3.4 owners get to utilize that don't crap out within a couple months.

[TopNotch]

Well, since you're coming to the parts barn inventory, you should know by the end of next Saturday.

[Raydar]

I'm in need of a
1) 2.8 manual coolant crossover pipe (the one that goes from drivers side to pax side water pump pickup) ., also a couple brackets,
2) one dog bone head to cross-face bracket (goes from dog bone mount bracket to block across timing cover), and
3) head oil dipstick mount bracket.
Any chance any of those the the "barn"
Ron

I believe the cross-face bracket was in the pile. Did you see it?
Wish I would have remembered you needed it. I'd have called it out to you.

[Fierofool]

I brought the pipe and dog bone bracket from Ron Robinson. 

[f85gtron]

Thanks Ron and Fierofool!  I've got the bracket and crossover pipe. Still looking for the timing cover. Didn't see one in the cache of parts.

[ron768]

Your welcome.