Home
About Us
Calendar
Fiero Documents
Merchandise
Tips
Links
Members
Message Board
Other Fiero Clubs
VIN Decoder
Speed Calculator
GFC Facebook Page
 

Author Topic: Shifter cable.  (Read 14499 times)

0 Members and 1 Guest are viewing this topic.

GTXVette

  • Hero Member
  • *****
  • Posts: 519
    • View Profile
Shifter cable.
« on: March 09, 2018, 08:50:14 am »
With little knowledge of how they work I Put the Shifter in reverse in a Nose Downhill Position, not to Bad if the clutch works.  Mine seems to be bleeding down. so in Jamin and Craming trying for "N" I put a Kink in the metal part that is attached to the Shifter and broke the Plastic sleeve at the base where the cable is mounted to the holder.I've bent the metal back to shape but is there a Stronger Cable to Use Because I feel it needs to be replaced now.

Fierofool

  • Global Moderator
  • *****
  • Posts: 10,565
    • View Profile
    • Georgia Fiero Club
Re: Shifter cable.
« Reply #1 on: March 09, 2018, 08:55:22 am »
If the clutch is bleeding down, it will cause it to hold tighter and not release when the pedal is depressed. 

What transmission do you have, and which cable is it?  Is it the small cable closest to the driver or the larger one to the right? 
There are three kinds of men:

1.    The ones that learn by reading.
2.    The few who learn by observation.
3.    The rest of them have to pee on the electric fence and find out for themselves.    Will Rogers

GTXVette

  • Hero Member
  • *****
  • Posts: 519
    • View Profile
Re: Shifter cable.
« Reply #2 on: March 11, 2018, 05:46:51 pm »
Isuzu I think, Both Cables over the Top. the cable is the one for forward and back Movement not the side to side. I read about A Trans Swap and they used a Boat Steering or Throttle Cable. I would think Not Cheap, but Marine service stuff is well made.
 Anyone have one cheep.

Fierofool

  • Global Moderator
  • *****
  • Posts: 10,565
    • View Profile
    • Georgia Fiero Club
Re: Shifter cable.
« Reply #3 on: March 11, 2018, 11:03:56 pm »
I have an aftermarket shift cable.  It's the one that is to the right as you view the trans from behind the car.  It's really big and heavy gauge. 

I haven't been able to physically help with your car but maybe I can help materially.  It's yours for free.
There are three kinds of men:

1.    The ones that learn by reading.
2.    The few who learn by observation.
3.    The rest of them have to pee on the electric fence and find out for themselves.    Will Rogers

GTXVette

  • Hero Member
  • *****
  • Posts: 519
    • View Profile
Re: Shifter cable.
« Reply #4 on: March 12, 2018, 08:27:46 am »
First Thanks,
 Looking forward from the Rear,the cable that is more centered  the one for side to side is is closser to the driver.
 I will walk out in a bit to look for sure.

Fierofool

  • Global Moderator
  • *****
  • Posts: 10,565
    • View Profile
    • Georgia Fiero Club
Re: Shifter cable.
« Reply #5 on: March 12, 2018, 09:37:56 am »
I looked at your pictures in the early part of the grassroots thread and I have the correct one you need. 
There are three kinds of men:

1.    The ones that learn by reading.
2.    The few who learn by observation.
3.    The rest of them have to pee on the electric fence and find out for themselves.    Will Rogers

GTXVette

  • Hero Member
  • *****
  • Posts: 519
    • View Profile
Re: Shifter cable.
« Reply #6 on: March 12, 2018, 06:09:17 pm »
 THAT'S SUPER DUPER Mr.Wilson,  Thank you.   

Fierofool

  • Global Moderator
  • *****
  • Posts: 10,565
    • View Profile
    • Georgia Fiero Club
Re: Shifter cable.
« Reply #7 on: March 16, 2018, 06:49:21 pm »
John, do you want to come over Saturday and get the cable?
There are three kinds of men:

1.    The ones that learn by reading.
2.    The few who learn by observation.
3.    The rest of them have to pee on the electric fence and find out for themselves.    Will Rogers